Electromagnet, Small
Catalogue No: 1070740
Demonstrates how electric current can be used to generate very strong magnetic fields. This two-part, dissectible electromagnet comprises a core and a yoke, with their mating surfaces precisely machined to very close tolerances. The core has a cylindrical coil wound with enameled copper wire on annular bobbin, which is connected to cell holder using crocodile clips. Both core and yoke provided with steel eye-bolts. Operates on cells. Generates tremendous lifting power.
* Electromagnet
Pack of (Pcs): 1
Demonstrates how electric current can be used to generate very strong magnetic fields. This two-part, dissectible electromagnet comprises a core and a yoke, with their mating surfaces precisely machined to very close tolerances. The core has a cylindrical coil wound with enameled copper wire on annular bobbin, which is connected to cell holder using crocodile clips. Both core and yoke provided with steel eye-bolts. Operates on cells. Generates tremendous lifting power.
* Electromagnet
Related products
-
Physics, Power Supplies
Battery Eliminator, 5 Amp
Catalogue No: 2040521/4
Features full wave bridge rectifier, double wound transformers for minimum losses over continuous prolonged use. Provided with indicator ON/OFF switch. Output voltages available are 2, 4, 6, 8, 10 and 12V, through a pair of 4mm safety socket and selectable through rotary knob with positive click stops. Input fused for protection. Operates on 110/220V AC (selectable), 50/60Hz. Available in current ratings:
* Battery Eliminator, 5APack of (Pcs): 1
SKU: 2040521/4 -
-
Heat, Physics
Joule And Watt Meter
Catalogue No: 1060950
Electrical energy consumed by a load with power is directly indicated on the front panel meter with a single selection switch. One can see either energy or power consumed by the applied load. Even we can use this instrument with data logger. A potential difference of 0-1V will generate on pulse output sockets. Max. input voltage for the meter is 24V D.C and 17V A.C with 10A max. current. Load current can be controlled by just rotating the knob fitted on the front panel indicated with load current.
Pack of (Pcs): 1
SKU: 1060950 -
-
Mechanics, Physics
Bench Clamp Fitting Pulley-Sheet Metal, 50mm
Catalogue No: 1030240/2
Comprising a 50mm diameter Plastic pulley mounted in a frame on cone bearings, meant primarily for clamping to the edge of a work-bench, table etc., with the pulley overhanging the edge and in a vertical plane. Overall length of frame (pulley bar) about 110mm. Maximum clamp opening 25mm.
* Pulley Dia: 50mm
* Frame: Sheet Metal
* Pulley Material: SteelPack of (Pcs): 1
SKU: 1030240/2
