Mechanics

Catalogue No: 1030640

Used for verifying the laws of composition and resolution of forces utilizing vector diagrams of several concurrent forces. Comprises a thick Aluminum circular table, about 40cm in diameter and finished with scratch resistant black epoxy coating. Raised outer rim of the table has circular scale graduated 0 to 360 degree x 1 degree and marked every 10 degree. Table mounted on a heavy, stable cast metal tripod base through a metal pipe, with base provided with leveling screws. Also included are four pulleys with clamp that can be attached anywhere along the rim. A detachable pin, positioned at the center of the to table, indicates the balancing of forces through the centering of ring tied to the strings carrying masses and suspended through the pulleys, around it. Supplied complete with set of strings tied to the rings, center pin and 4 sets of slotted masses with hanger, each set having one hanger 100g and masses 1 each of 10, 20, 50 and 100g.

* Force Table

Pack of (Pcs): 1

Catalogue No: 1030630

A completely self contained kit with all the necessary components required for studying the concept of force and motion. The focus of the kit is to:
* Extend investigations into motion, pendulums, collisions, momentum and dynamic forces.
* Understand the mechanics of motion, including Newton’s Laws of Motion, motion with and without friction, elastic and inelastic collisions, kinetic energy and the change of momentum.
* Investigate the concept of variable inertia.
It comes nicely packed in a heavy duty carry case and contains:
* Ticker timer
* Plastic moulded trolley (simple)
* Plastic moulded trolley (spring loaded)
* trolley weight
* 10g masses
* Carbon Disc
* Tape for ticker timer
* Spirit level
* Graduated force board with legs
* Pulleys
* Cotton thread reel
* Hooks
* Spring balances
* Pendulum bob
* Pendulum bob support
* Track, Retort Clamp, Retort Rod & Base.
Some of the experiments that can be performed using this are:
* Understanding the behavior of motion
* Acceleration along an inclined plane
* Concept of equilibrium
* Newton’s laws of motion
* Laws of friction
* Motion with and without friction
* Dynamics problems
* Effect of different accelerating forces on different masses
* Elastic and inelastic collisions
* Determination of acceleration due to gravity
* Investigation of variable inertia
* Force, Motion and Dynamics Kit

Pack of (Set): 1

Catalogue No: 1030916

Consists of apparatus Cat. No. 1030915 & Digital Timer Cat. No. 1030916/1.
* Digital Counter g By Free Fall

Pack of (Pcs): 1

Catalogue No: 1030930

Comprises a metal base with detachable metal rod for support and having level adjuster knobs. Three fixatives injected plastic with through fittings compatible with the metal rod support and the 1 meter long aluminum graduated track. In the lower part of the track a damping device is attached to contain the ball used for free fall.
Accessories: Solenoid, 5V operated
* Polished MS Ball 19mm
* g By Free Fall Apparatus, With Photogates

Pack of (Pcs): 1

Catalogue No: 1030635

Wooden track 150x1200mm that can be mounted on a stand is suitable for various activities involving linear motion – friction, acceleration, Newton’s laws etc. The track has parallel grooves for proper motion of cart and a scale gradated 0-90cm for distance measurement. Cart runs on metal wheels with ball bearing to minimize friction. Photogate timing system can be used with the track for greater accuracy.
* INCLINED PLANE

Pack of (Pcs): 1

Catalogue No: 1031060

Comprises an aluminum inclined plane of size 680 x 80mm (L x W) hinged to an aluminum base board of size 500 x 80mm (L x W). An arc scale graduated 0-45 degree x 1 degree is mounted on base board to given angle of inclination. Includes weight pan with cord, trolley and adjustable pulley.
* Inclined Plane, All Metal

Pack of (Set): 1

Catalogue No: 1031065

A metal inclinded plane attached to the base and knob for the angle adjustment at the base. Which can be read from angle measure. One end of inclined plane has a 40mm diameter pulley, alongwith an adjustable dynamometer. Two photo gates are mounted above the inclined plane for timing motion.
Accessories includes:
* Plastic trolley 1 Pc.
* Wooden block, one side plane and one side rough 1 Pc.
* Thread with brass pointer 1 Pc.
* Plastic Weights 1g. 6 Pcs.
* Plastic Weights 5g. 4 Pcs.
* Plastic Weights 10g. 1 Pc.
* Plastic Weights 15g. 1 Pc.
* Plastic Weights 20g. 1 Pc.
* Plastic Weights 25g. 1 Pc.
* Inclined Plane, With Photo Gates

Pack of (Set): 1

Catalogue No: 1031000

Useful for exploring the concept of motion on an inclined surface and its relation to the friction. A pair of polished wooden boards attached together at each end are hinged at one end to a metal baseboard below it so that the wooden boards can be moved to form an inclined surface. One side of the board has a linear scale graduated every 5cm to measure linear distance along its length, while an adjustable and removable arc scale graduated 0-45 degree x 1degree measures its angle of inclination. Angle measure also has linear scale graduated in centimeters to measure the vertical height of inclined surface at a point. A plastic pulley attached to the inclined boards supports masses suspended from thread, the other end of thread being connected to the object moving on inclined surface. Size of inclined surface 145mm width.
* Inclined Plane, Wood & Metal

Pack of (Pcs): 1