Trajectory Apparatus
Catalogue No: 1030850
To study the trajectory of a body projected with some initial horizontal velocity and falling freely under gravity. Comprises a backboard of size 38 x 36cm and an adjustable angle ramp along for launching the ball with the provision for mounting it on the board. The board has a centimeter grid for aligning the graph-paper or for stroboscopic photography and a pair of metal clips to support the graph paper. A metal support located on the right side of the board assists in locating self marking paper tape where the ball strikes to give the final position of the ball in motion. Balls projected with different starting positions on the ramp will have different velocities of projection. Base of the board is cushioned to absorb the impact of falling ball. Also includes 3 balls: 2 steel balls of diameter about 13 and 19mm and a glass ball of size 16mm. Supplied complete with a roll of self marking paper tape and 5 graph paper sheets having millimeter grid.
* TRAJECTORY APPARATUS
Pack of (Pcs): 1
To study the trajectory of a body projected with some initial horizontal velocity and falling freely under gravity. Comprises a backboard of size 38 x 36cm and an adjustable angle ramp along for launching the ball with the provision for mounting it on the board. The board has a centimeter grid for aligning the graph-paper or for stroboscopic photography and a pair of metal clips to support the graph paper. A metal support located on the right side of the board assists in locating self marking paper tape where the ball strikes to give the final position of the ball in motion. Balls projected with different starting positions on the ramp will have different velocities of projection. Base of the board is cushioned to absorb the impact of falling ball. Also includes 3 balls: 2 steel balls of diameter about 13 and 19mm and a glass ball of size 16mm. Supplied complete with a roll of self marking paper tape and 5 graph paper sheets having millimeter grid.
* TRAJECTORY APPARATUS
Related products
-
Mechanics, Physics
Bench Clamp Fitting Pulley-Cast Metal, 50mm
Catalogue No: 1030240/1
Comprising a 50mm diameter Aluminium pulley mounted in a frame on cone bearings, meant primarily for clamping to the edge of a work-bench, table etc., with the pulley overhanging the edge and in a vertical plane. Overall length of frame (pulley bar) about 110mm. Maximum clamp opening 25mm.
* Pulley Dia: 50mm
* Frame: Cast Metal
* Pulley Material: AluminiumPack of (Pcs): 1
SKU: 1030240/1 -
General Laboratory Tools, Physics
Spirit Levels, 120cm
Catalogue No: 2031841_2I
Shock proof and unbreakable bubble tube or vials manufactured with latest technique to prevent vaporization and leakage under normal working conditions. Each level electronically calibrated to ensure precise mounting and alignment of vials and require no adjustment by the user.
*These levels are available with optional add-ons, such as magnetic base and angle setter.
* Levels manufactured from light-weight and economical profile and is meant for normal routine use. Come with metric graduated edge for linear measurements.
2 Vial, Size 120cmPack of (Pcs): 1
SKU: 2031841_2I -
Physics, Power Supplies
Battery Eliminator, 1 Amp
Catalogue No: 2040521/2
Features full wave bridge rectifier, double wound transformers for minimum losses over continuous prolonged use. Provided with indicator ON/OFF switch. Output voltages available are 2, 4, 6, 8, 10 and 12V, through a pair of 4mm safety socket and selectable through rotary knob with positive click stops. Input fused for protection. Operates on 110/220V AC (selectable), 50/60Hz. Available in current ratings:
* Battery Eliminator, 1APack of (Pcs): 1
SKU: 2040521/2 -
-
Heat, Physics
Joule And Watt Meter
Catalogue No: 1060950
Electrical energy consumed by a load with power is directly indicated on the front panel meter with a single selection switch. One can see either energy or power consumed by the applied load. Even we can use this instrument with data logger. A potential difference of 0-1V will generate on pulse output sockets. Max. input voltage for the meter is 24V D.C and 17V A.C with 10A max. current. Load current can be controlled by just rotating the knob fitted on the front panel indicated with load current.
Pack of (Pcs): 1
SKU: 1060950
