Shop
Showing 2769–2784 of 6648 results
-
-
Plasticware
Float Rack
Catalogue No: 5051650
This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water bath Easy to load, these are essential in microbiology & immunology labs.
The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting.
* 16 MCTs of 1.5mlSKU: 5051650 -
Magnetism & Electromagnetism, Physics
Floating Ring Magnets
Catalogue No: 1070220
Helps understand the concept of magnetic levitation. Five strong ceramic ring magnets of size 25 x 10mm (Dia x Height) in red and blue ABS casing are located on a molulded plastic stand.
* Floating Ring MagnetsPack of (Pcs): 1
SKU: 1070220 -
Physics, Property of Matter Fluids
Fluid Pressure Apparatus
Catalogue No: 1020800
Demonstrates the phenomenon of transmissibility of fluid pressure for the same force exerted, pressure is inversely proportional to the surface area. The apparatus comprises of the plated brass cylindrical tubes of different diameters, each fitted with piston and connected to each other through a brass tube at their bottom. Pistons have circular disc at the top for loading masses (masses not included) Complete apparatus mounted on a Plastic base.
* Fluid Pressure ApparatusPack of (Pcs): 1
SKU: 1020800 -
Physics, Sensors
Fluoride Sensor With Electrode
Catalogue No: 1160135
Easily measures the amount of fluoride in a solution. Use it in Agriculture studies and Chemistry experiments.
* Electrode also sold separately
* Concentration Range 1 uM to saturation or
0.02 ppm to saturationPack of (Pcs): 1
SKU: 1160135 -
Biological Laboratory Tools/Instruments
Food Calorimeter
Catalogue No. 4011780
A glass jar incorporated with a inverted glass jar used as a combustion chamber open at both ends (205×100)mm (height x diameter). A copper spiral heat transfer tube vertically fitted with combustion chamber via. rubber stopper. A removable metallic top cover which allow to pass the stirrer and copper spiral tube with centered hole to insert the thermometer. A circular metallic disc of diameter 100mm with a boss head for mounting on a 13mm retort rod used as the floor of the combustion chamber. A pair of pillars carrying the low voltage igniter coil. A crucible that can be raised to the igniter coil with the help of the circular ring from the out side of the assembly apparatus. The whole assembly is fitted on a (200×130) mm rectangular base with a rod of 13mm diameter.
SKU: 4011780 -
Physics, Property of Matter Fluids
Foot Pump
Catalogue No: 1021100
For use with Boyle’s Law apparatus, or any other application needing manual compressed air source or blowing of air. A metal cylinder has an outlet tube with pressure gauge present at its one end and piston with foot-pedal attached at the other end. Pressing the pedal down and releasing it moves the piston in and out of the cylinder, pushing the air through the flexible hose pipe, which has a standard automobile tyre valve connector at its free end. A set of adaptors is included to facilitate the connection of flexible hose pipe to various inlets.
* FOOT PUMPPack of (Pcs): 1
SKU: 1021100 -
Mechanics, Physics
Force Mechanism (Trough)
Catalogue No: 1030571
What are the effects of acceleration and gravity on a moving body. Determine acceleration, speed and distances when applying a variable force. Propel a ball or two down our track and observe how far and how many balls, positioned further down the track, move. Includes: 43 Inch long one-piece metal track; plastic supports; trigger with 3 settings; 5 steel balls of 1 Inch diameter; wood block.
* Force Mechanism (Trough)Pack of (Set): 1
SKU: 1030571 -
Physics, Property of Matter Fluids
Force Pump
Catalogue No: 1020680_1
Working model made of borosilicate glass. Demonstrates the working principle of the force pump, concept of double valve action of the pump and its ability to eject water at high pressure. Comprises a glass cylinder with a non-return float valve at its lower end, which also has an outlet that in turn communicates to the lower end of a secondary cylinder also equipped with a non-return float valve. The outlet tube from a secondary cylinder is drawn out into a jet.
* Force PumpPack of (Pcs): 1
SKU: 1020680_1 -
-
Mechanics, Physics
Force Table
Catalogue No: 1030640
Used for verifying the laws of composition and resolution of forces utilizing vector diagrams of several concurrent forces. Comprises a thick Aluminum circular table, about 40cm in diameter and finished with scratch resistant black epoxy coating. Raised outer rim of the table has circular scale graduated 0 to 360 degree x 1 degree and marked every 10 degree. Table mounted on a heavy, stable cast metal tripod base through a metal pipe, with base provided with leveling screws. Also included are four pulleys with clamp that can be attached anywhere along the rim. A detachable pin, positioned at the center of the to table, indicates the balancing of forces through the centering of ring tied to the strings carrying masses and suspended through the pulleys, around it. Supplied complete with set of strings tied to the rings, center pin and 4 sets of slotted masses with hanger, each set having one hanger 100g and masses 1 each of 10, 20, 50 and 100g.
* Force Table
Pack of (Pcs): 1
SKU: 1030640 -
Mechanics, Physics
Force, Motion and Dynamics Kit
Catalogue No: 1030630
A completely self contained kit with all the necessary components required for studying the concept of force and motion. The focus of the kit is to:
* Extend investigations into motion, pendulums, collisions, momentum and dynamic forces.
* Understand the mechanics of motion, including Newton’s Laws of Motion, motion with and without friction, elastic and inelastic collisions, kinetic energy and the change of momentum.
* Investigate the concept of variable inertia.
It comes nicely packed in a heavy duty carry case and contains:
* Ticker timer
* Plastic moulded trolley (simple)
* Plastic moulded trolley (spring loaded)
* trolley weight
* 10g masses
* Carbon Disc
* Tape for ticker timer
* Spirit level
* Graduated force board with legs
* Pulleys
* Cotton thread reel
* Hooks
* Spring balances
* Pendulum bob
* Pendulum bob support
* Track, Retort Clamp, Retort Rod & Base.
Some of the experiments that can be performed using this are:
* Understanding the behavior of motion
* Acceleration along an inclined plane
* Concept of equilibrium
* Newton’s laws of motion
* Laws of friction
* Motion with and without friction
* Dynamics problems
* Effect of different accelerating forces on different masses
* Elastic and inelastic collisions
* Determination of acceleration due to gravity
* Investigation of variable inertia
* Force, Motion and Dynamics KitPack of (Set): 1
SKU: 1030630 -
Physics, Sound Waves & Oscillations
Forced Oscillation Demonstrator
Catalogue No: 1120530
For the study of resultant vibratory motion (forced) produced on account of oscillations of two coupled springs. Two springs, each having different
spring constants (hence different natural frequencies of vibration), are attached vertically to each other through a cylindrical mass and the assembly is supported at the top on an adjustable support. The lower spring also has aweight attached to its lower end, which is guided inside another adjustable support. On stretching and releasing mass at the lower end, both the stretched springs show their independent oscillations, influencing the motion of one another. Complete assemblymounted on a stable base.
* FORCED OSCILLATION DEMONSTRATORPack of (Pcs): 1
SKU: 1120530
